Key Specifications

• Max. Forming Area:
  720 × 350 mm

• Sheet Thickness (Min–Max):
  0.20 mm – 1.0 mm
  (Up to 1.35 mm in special cases)

• Maximum Draw Depth:
  100 mm
  (Up to 135 mm in special cases)

• Approximate Weight:
  2700 kg

• Raw Materials Supported:
  HIPS, PVC, PET, PP

• Production Speed:
  Up to 35 cycles per minute

• Sheet Width (Max–Min):
  650 – 350 mm

• Connected Load:
  24.25 kW
  (41.75 kW when bottom heater box is ON for PP)

• Compressed Air Requirement:
  7 kg/cm² continuous
  (15 HP air compressor)

• Vacuum Pump Capacity:
  660 or 1000 LPM
  (with in-mold cutting facility)